This website requires cookies to provide all of its features. By using our website, you agree to our use of cookies Learn more Accept and Close Message

Vent-Axia Lo-Carbon Kinetic E MVHR Unit (443303)

Product Code: 443303 443303
Brand: Vent Axia
Colour / Finish: White
Estimated Delivery Time: 1 to 3 Days
£1,404.36 £1,170.30

Vent-Axia are the leading manufacturers and suppliers of heating, ventilation and air conditioning systems, both in the UK and around the world. For over 75 years, they have led the industry in air ventilation products, systems and services. Whatever your requirement, budget or setting, Vent-Axia can provide the solution you need. From extraction fans for the home to large commercial ventilation solutions, their wide HVAC range features a product for every air handling purpose.

The Lo-Carbon Kinetic E models have 2 fully adjustable speeds. On the front of the unit are four potentiometers that can be used to pre-set the speeds to any required air-flow within the performance range.

Both motors are independently adjustable on Normal and Boost speeds to enable optimised commissioning air flows.

The Kinetic E model can be mounted vertically in a roof space, and is suitable for wall mounting or within a kitchen cupboard. When mounted in an unheated area ducting should be insulated. Ducting can be attached to the unit horizonally, vertically or both. Minimum internal depth of kitchen cupboard; 290mm.

Left or right hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on-site by simply removing the control panel, rotating the unit 180 degrees and re-attaching the control panel.

Horizontal and vertical spigots: The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied.
Condensate drain can be taken out through the back, bottom or front of the unit. The final condensate connection is made outside the unit and can
be completed after installation.

KEY FEATURES

  • Up to 91% heat recovery whilst controlling condensation
  • Left or right hand installation
  • Horizontal and/or vertical duct outlets
  • Integrated potentiometer control for simple and accurate commissioning
  • Light weight for easy installation
  • External condensate connection
  • Adjustable delay on/delay off timer
  • Easy access G3 filters
  • Colour / Finish: White

Additional Information

  • Dimensions (H x W x D): 650 x 550 x 285

Manuals & Specifications

High efficiency, compact, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit.
 
Write Your Own Review
You're reviewing:Vent-Axia Lo-Carbon Kinetic E MVHR Unit (443303)
Your Rating