Sangamo 11002 Analogue DIN One Module One Channel Time Switch

A one module wide general purpose, 24 hour, single channel analogue timer that it is perfect for applications where space economy may be a factor. Requires minimum time to set up. They can be used for lighting, heating, ventilation, motor control, pump control, machinery control, etc...

Supply Voltage 230V, 50-60Hz 
Power Consumption 0.4W
Channel (volt-free) Change-over, contact gap
Contact Material AgCdO
Switching Capacity 16A / 250V~ at cosφ=1 | 2.5A with inductive load cosφ=0.6
Min. Switching Power 1,000mW (10V/10mA)
Filament Lamp, Halogen Lamp 2,000W
Fluorescent Lamp uncompensated 1,000W
Fluorescent Lamp series compensated 750W
LED (230V~)/CFL 200W
Minimum Interval 15 min.
Quartz Accuracy (at 20°C) ≦ ±1 sec/day
Power Back-up (at 20°C) approx. 100 hours
Program Security Unlimited (E²-PROM)
Permitted Ambient Temperature -5°C to 50°C
Housing Self-extinguishing thermoplastic
Mounting 35mm DIN-Rail
Type of protection IP20 to DIN EN 60529

Wiring Guide

1 - Output (Load Ch. A) – Normally Open

2 – Input (Load Ch. A) – External link 2 to L if using a single 230Vac supply
L – Live In (Clock)
N – Neutral In (Clock)