Sangamo 71111 General Purpose 1 Module 1 Channel 7 Day Pulse Programming Timer

A one module wide general purpose timer that it is perfect for applications where space economy may be a factor. Requires minimum time to set up. They can be used for lighting, heating, ventilation, motor control, pump control, machinery control, etc...

The 71111 can be extremely quick and easy to program using Sangamo’s optional Easy Vue software (with USB Hub 25195) or the Sangamo Connect Android app (with USB Hub with Bluetooth 25196 also required).

The 71111 is the replacement product for the 20110 and 20722.

Supply Voltage 230V, 50-60Hz
Power Consumption 0.7W
Channel (volt-free) Change-over, contact gap
Contact Material AgSnO²
Switching Capacity Per Channel 16A / 250V~ at cosφ=1 | 10A with inductive load cosφ=0.6
Min. Switching Power 300mW (5V/5mA)
Max. starting current 30A
Filament Lamp, Halogen Lamp 400W
Fluorescent Lamp with electron. lamp ballast 100W
Fluorescent Lamp with convent. lamp ballast 700W
LED (230V~)/CFL 50W
Switching Functions ON; OFF; pulse
Memory Locations 46
Minimum Interval 1min.
Quartz Accuracy (at 20°C) ≦ ±0.5 sec/day
Power Back-up (at 20°C) approx. 6 years
Program Security Unlimited (E²-PROM)
Display High resolution LCD (visable area 7.5cm²)
Permitted Ambient Temperature -30°C to 50°C
Housing Self-extinguishing thermoplastic
Mounting 35mm DIN-Rail
Type of Connection Screw terminals (pull-up type)
Type of protection IP20 to DIN EN 60529
Class of Protection II (when installed according to regulations)
Mode of Operation (DIN EN 60730-1) 1BSTU
Degree of Contamination (DIN EN 60730-1) 2
Rated Surge Voltage (DIN EN 60730-1) 4kV
Certification Mark VDE

1 – Output (Load Ch. A) – Normally Open
2 – Input (Load Ch. A) – External link 2 to L if using a single 230Aac supply
3 – Not Used – Normally Closed Connection
N – Neutral In (Clock)
L – Live In (Clock)