Fullband MIMORAD 4G Antenna for EV Charger - COM-0000-0066
Product Code: COM-0000-0066
Colour: Not Assigned
The Fullband® MIMORAD® antenna works with all global 2G, 3G and 4G mobile networks, it can be used with many styles of routers, including those that have a MAIN and AUX antenna connections.
It is fully IP 67 rated, waterproof, and wind resistant to 120 MPH. It can be positioned indoors/outdoors, in the optimum position to capture the best 2G/3G/4G signal and deliver it to a connected device, its vertical beam width and Back to front ratio ensure that it will deliver the best performance at all times. The MIMORAD 4G antenna is Omni-Directional, If you require a directional type, contact us for another product.
The nominal Gain of this MiMo antenna is 6dBi and the antenna can be wall or pole mounted, and dimensions are 70mm Diameter x 350mm height, supplied with fitting brackets.
The MIMORAD® antenna is pre-terminated with 2 x 5m RG58 low loss shielded cables terminated with SMA Male connectors to fit directly to the antenna ports of your 3G or 4G Router. If you need to extend the cable length then you will need two antenna extension cables. Please also remember that if you are using antenna extension cables that your extended cable length will depend upon the signal strength of the mobile network at the antenna location. If your signal strength is excellent then you can extend up to 20m, depending on best signal location.
What is MiMo?
MIMO (multiple input, multiple output) is an antenna technology for wireless communications in which multiple elements within an antenna are used at both the source (transmitter) and the destination (receiver). The antennas at each end of the communications circuit are combined to minimise errors and optimise data speed. MIMO is one of several forms of smart antenna technology, and regarded as the best, with 4G frequencies now available, the network will have a higher data transfer rate than 3G.
With the appropriate amount of spectrum and good network engineering, a Long Term Evolution (LTE) based network has the potential to reach 100 Mbps in future, current rates are normally around the 40-50Mbps. The MIMORAD® antenna, is more than capable of handling the current and future data transfer rates, again benefiting from the availability of 4G routers.
We have had excellent feedback from both commercial & single end user customers. The new 2017 model, will ensure that if any new frequencies are allocated within the GSM/GPRS band, the antenna is completely future proof, and will work as expected, giving excellent results regardless of the frequency within the GSM/GPRS band
The antenna can be mounted indoors for In-Building communications, loft and of course for best results, outdoors. We have supplied this antenna to many leading global wireless companies, and it is proving to be a very successful resolution for their wireless requirements.
MIMORAD® Technical Specification
The technical information can be found on our data sheet, with radiation patterns, VSWR, sizes and other important information, to help you, our wireless engineers are only a phone call or email away, should you require any help regarding the MIMORAD 4G Antenna.
Order today at our great prices, and enjoy our superb customer service!
If you’re not sure about quantities, sizes or have any other questions about your electrical wholesale products, our Electrical2Go sales team will be more than happy to help. Give them a call now on 01424 220384.
- Works with all global 2G, 3G and 4G mobile networks
- Fully IP67 rated, waterproof, and wind resistant to 120 MPH
- Supplied with fitting brackets
- Dimensions (H x W x D) 70mm Diameter x 350mm height