Deligo SLMBL Silicone Sealant WP Black

Usage: Sealing & Waterproofing in areas of high humidity
Cure Time: Tack < 30 minutes; full cure 3-6mm per day

A multi-purpose, low modulus silicone rubber sealant with fungicide, suitable for most sealing jobs around the home.

Conforms to BS EN 15651-1,3:2012 Uses Bond It GP 200 is suitable for sealing and waterproofing in areas of high humidity. It has excellent adhesion to glass, glazed surfaces, ceramic tiles, many plastics and most paints. It is ideal for the following applications - kitchen work tops, bathrooms, showers, utility rooms and general DIY applications:

Car | Boat | Caravan | House

Preparation: Ensure all surfaces are clean, dry and free from grease or any contaminants that may hinder adhesion. For best results on movement joints, Bond It EXPANDING FOAM is recommended as a backing material, or a suitable backing tape or rod. All cements, concretes and bare metal surfaces should be primed prior to the application of the silicone. Timber should be primed and painted.

Application: Apply using a standard sealant gun with the nozzle cut at an angle of 45°, and to an opening slightly larger than the joint to be sealed. Tool using a stick or plastic spatula wetted with soapy water. Do not apply to wet surfaces, although wetting immediately afterwards will not have any adverse effects. Tools can be cleaned in white spirit prior to curing taking place.

Limitations: Where bare ferrous metals, brass copper, lead, aluminium or zinc cannot be primed, use Bond It ULTI-MATE Silicone Sealant. Do not use on surfaces where water can penetrate through porous materials to bond interface without first carrying out remedial work. Not suitable for fixing of mirrors or sealing natural marble.

Maintenance: Resistant to all common household cleaning chemicals. In showers and bathrooms best results are obtained with a weekly clean to prevent organic build up. Stains can be removed with commercial bleach.